Stainless Steel Angle Seat Piston Valve

Angle seat piston valve from Zhejiang Jimai Auto-tech Co,.Ltd is built by CF8 or CF8M material. It has high level of corrosion resistant protection, which contributes to the ability to work on most gases, liquids, vapors and corrosive applications. Also, angle seat piston valve is widely used in short-time frequent start-up. It has the characteristics of sensitive response and accurate action. When used with solenoid valve, pneumatic control can accurately control the flow of gas and liquid. Angle seat piston valve can help to achieve accurate temperature control, dripping liquid and other requirements.

product details

Product Features

● In the double-acting configuration, there is no return spring and the pilot medium is used both for opening and for closing the valve.

● A red indicator becomes visible through the sight dome that is found on the top of the actuator when the valve is in the open position.

● The pressure range depends on the pressure of the pilot medium and the controlled medium and on the direction of the flow, but also on construction parameters of the valve, such as the diameter of the orifice, the diameter of the actuator cylinder and the spring force.

Product specifications

Item	Angle seat piston valve
Port size	DN15 ~ DN80
Medium	Air, water, steam, gas, oil
Medium temperate	-20~180℃
Air supply pressure	0.3 ~ 0.8Mpa
Valve body material	CF8 / CF8M
Valve seat material	PTFE
Valve stem material	CF8
Sealing ring material	NBR
Control type	Normally closed, normally open, double action
Connection way	Thread, flange, welding, tri-clamp

Technical parameter

Medium temp	-20°C~+180°C
Ambient temp	-20°C~+60°C
Nominal pressure	1.6Mpa
Air pressure	0.3~0.8Mpa
Size	DN15-DN65
Cover material	SS304
Body material	SS304
Seat material	PTFE
Stem material	SS304
Axis material	SS304
Piston	Aluminum alloy
Gasket	PTFE
Seal material	NBR

Type	Actuator mm	D mm	R mm	P	G	H mm	L mm	L1 mm	T mm
DN15	50	62	33.5	G1/8’’	G1/2’’	135	136	68	11
DN20	50	62	33.5	G1/8’	G3/4’’	139	144	75	14
DN25	50	62	42	G1/8’	G1’’	147	154	90	15
DN32	63	76	42	G1/8’	G1-1/4’’	177	188	115	17.5
DN40	63	76	42	G1/8’	G1-1/2’’	186	177	115	17.5
DN50	80	96	52	G1/8’	G2’’	192	263	135	20
DN65	100	114	52	G1/4’’	G2 1/2’’	263	325	185	27

Online Inquiry

Your Name*

E-mail*

Phone Number

Country

Remarks*

BY ENTERING YOUR E-MAIL ADDRESS YOU ACCEPT INJET PRIVACY POLICY

rest